How To Play Baseball For Beginners - Part 2

How To Play Baseball For Beginners - Part 2

Play the game

1-Set the field. Each player takes defensive position in the field. The four players in the table - the first, second base player, short field and third base - are strategically positioned in their regions and often adjust the position according to many factors, including the tendency of the mass to hit the Ball in one direction or in one. Another and the situation in the playground of the land, too, are more or less distant from the house, the more left or more to the right, depending on a variety of variables including: propensities to each batter, Strategy game, pitcher strengths and weaknesses, playing field (each field is different) and time (especially wind direction, which can greatly affect ball flight). The eight defensive players (in addition to the catcher) must be "fair territory" (between the foul lines), because each step is started, but nothing in the rules forces a defensive player to maintain a certain area, Thrower a foot in contact with the rubber when throwing the ball) and the receiver (which should be in the receiver drawer behind the plate). The batter is hit in the left (right) or right (left) box on one side of the fastening plate. The referee checks briefly that the nine defensive players are on the pitch and the batter is in the box, then shouts "play ball" to start the game.

2-Play ground, swing and hit the ball. The pitcher tries to throw balls that are hard to reach, while still being inside the "strike zone", where the rapper is expected to try to beat them. The batter does everything possible to judge quickly if the ball is sure to hit, then balance it. If the batter connects and the ball does not cross the fault lines, it is in play.

The pitchers often use fastballs, curves, sliders to change and confuse batters. The fastball is what it sounds - very fast - just like the curve. A change involves the pitcher pretending to throw a quick ball, but not throwing a much slower, which confuses the sense of opportunity of mass. A cursor is a hard ball to start that combines most of the speed of a fast ball with the lateral movement of a curve.

3-Run the bases. While the ball moves over the ground or by air or ground, the batter (now called the "runner" or "base runner") drops the bat and runs as fast as possible to the first base. As long as the pilot receives no floating element tag, outward or outward land, they can stop at first base, or continue until it is no longer safe. Meanwhile, the gardeners work to collect the ball and return it to the pilot's position to take them out.

Gardeners are allowed to throw the ball at another or run with the ball getting close enough to the pilot to an exit. Drivers are not allowed to touch the ball on their own.
A runner who is not in danger of being forced or grounded can sometimes avoid being labeled a base by sliding under the base and trying to touch the base before the ball touches. Since even a finger or toe touches the base before the runner is marked, they are safe.

4-Steal bases. In most cases, the rider will not be able to complete a complete circuit of the bases in a single game, so he must stop on a base and wait for the next batter to move to the plate. However, at any time, the pilot may attempt to "steal" the next base with the pitch before the pitcher realizes what is happening. Since the pitcher is usually the best pitcher on the team, stealing a base is very dangerous: the pitcher can turn and throw the ball to a player base instead of the bats, allowing an easy etiquette.

Base men can also pass the ball to each other, trapping the runner between the bases until a desperate (and usually unnecessary) attempt is made to fall into one of them. Runners can not leave the line between the two databases, ie: there are no leaks in the open field and then a circle around the back, for example.
Pilots are safe on the basics, but are not required to stay on base. Most brokers are preparing for a possible theft by getting rid of part of their current base, but not so that they can not return if they need it.

5-Load bases. A pilot is allowed in each base at any time - this is where the force of the rule comes. However, since there are three bases, up to four riders can be in the field at a time. When all three bases have a runner, it is said that the offensive team they have loaded the "bases", which means that the next reasonable success or walking will necessarily lead to a race or exit. Having full bases is not necessarily the most ideal situation for a team, but it is very exciting for the public.

6-Hit a home run. Sometimes the batter hits the ball so hard and so well that they are able to run around the entire diamond before getting an out, scoring a run on the first try. This is called a "home run". Most home systems are the result of the ball having gone through the fence at the back of the field at this point, it is completely out of the game and all the field team can do is clock.

Obviously a grand slam is worth four points (one for each rider), and you can change the course of a difficult match almost guaranteed victory. Great slam shut are exceptionally rare, but very exciting.

7-Move forward with regular games. Shopping at home is fun, but not common enough to be invoked as a way to win the game. Instead, focus on learning to race away after a normal stroke. Knowing when to stop and wait, can stay in the game longer and increase your chances of scoring a point. There are three other races on the plate apart from the home race:

This is a stroke of the fixing plate to the first base. This is perhaps the most common type of stroke due to its safety and flexibility.
Double is a strike from the anchor plate to the second base. Most of the time, a double is a good choice for mid-range shots, or shots that leave the field team distracted by another player on the second or third base.
A triple is a race from the anchor plate to the third base. Triples are infrequent, but often lead to cuts shortly afterwards.

8-Try a hit and run game. The good contact hitter (batters who have good control over the direction of the ball when hit) can work with a runner at first to make a hole between the first and second base, which is usually protected by the second basic player . The pilot of the first attempts to steal second to the right when he started the field, forcing the second base to follow. The battery then drives the ball through the gap in the open field and takes a single or double.

9-The racing trade with games of sacrifice. There are two types of play sacrifice in which a hitter accept a fun outing to move a second or third base runner closer to home so that they can score a run.

A touch of sacrifice is a special type of game where the batter uses the stick to hit the ball in the air without sending forward. The ball dropped right in front of the plate, so it is a simple matter for the receiver to retrieve the ball and the mass of the pasta; However, in the time it takes to do this, another broker may be able to advance to third base or even flat.
The fastest runners can sometimes survive a shock and do it at first without being grounded.
A sacrifice fly is a pop fly (a high ball, the bow that is very easy to catch) that gives a third time the haste home base before the runner gets a drop down icon.

10-Get multiple pilots at once. When the field is to the right, the outfielders may be able to pull a double play or even a triple play, in which they put two or three outs in one piece. Triple plays are rare but possible if there are enough power outlets available. Duplicate games are more common, and often involve forcing a runner into the first mass, then ground before reaching the first.

From three outs lead the teams to change, a triple play end immediately to the current average of the entry.

11-Understanding the infield fly rule. This rule is invoked only by the referees, but it is important to understand. When a hitter strikes a pop fly that will land in the stadium area, the referee may decide that it is too easy to catch and invoke the infield fly rule. This makes the dough to be automatic and that the implementation team get triple play easy to grab the ball and forcing outs other databases. In short, it is a rule that regulates the fairness of the game, designed to keep things interesting for both parties. Knowing about it now will help you when you hear it called later.
Image Step 19 called Play Baseball.

12-Continue playing until the correct number of rounds is reached. Unlike basketball and many other team sports, baseball does not have a clock or timer, except for league matches. Instead, the game is played until all the rounds are completed. Because they can make plays to hang for a long period, teams are allowed to have substitutes, including additional throwers (called relay throwers) to keep the game fresh from start to finish. At the end of the final round, the team won more sharply.

If the teams are tied at the end of the last round, a new addition is played. It is very rare that a baseball game ends in a draw; Typically, extra entries are added until a team manages to scrape an edge.

How To Play Baseball For Beginners - Part 1

How To Play Baseball For Beginners

Baseball is one of the most beloved and emblematic American sports. Read these steps to learn how to play the game and how to play it yourself.

Fundamentals and configuration

Understand the basics of the game. Baseball is a team sport played in a special field during several periods of play, called sleeves. Each round is divided into two parts, the "up" and "down", during which one team tries to score points, while the other team defends the ground. The points are scored by hitting a thrown ball with a bat and ran around the four bases and back towards the plate (the plate it from barking). If the runner is touched with baseball by the defensive team before finishing the run, the runner is out. After three exits, the front entrance and the teams change places.

The college games and professional baseball are played nine innings. The levels of competition are less intense generally six or September
The whole defensive team is still on the ground. Offensive players try to hit the ball, one by one, then to start, there is only one offensive player in the field. Gradually, as the game progresses, up to four offensive players may be on the field, but only one batter is at some point. The other three players simply waiting in safe places to complete their races and points.
There are three safe places for runners, one on each corner of the race zone, called bases. The bases must be visited to add a point; Riders can also choose to leave on one basis and wait for the next part to keep running the next. Bases are discussed in more detail below.

Familiarize yourself with the stadium area

The baseball field (sometimes called the "baseball diamond") is a specially designed field consisting of two basic parts: the infield and outfield. The inner picture is the center of action. It is defined by four sturdy pads placed on the floor, called bases, at points equal to each other, forming a square diamond shape. The path to each base to the next is dirt instead of grass. In the diamond is a lawn area, and about half of which is a low-lying mound with another dish that called the launcher's mound.

The batter (attacker) is on a home base called plate and waits for the ball thrown from the pitcher's mound so they can try to hit him with the bat. There is a painted rectangle on each side of the home plate called the "box of dough" that defines the place where the batters are allowed to stand. Another picture painted behind the plate defines where the receiver crouched to catch the ball, if the batter loses.
While other bases are of four-sided canvas and in general, the plate is pentagonal and rubber, to distinguish. There is also usually a large knife-shaped fence around the plate to avoid the stray bullets hit the audience behind.
The bases are numbered counterclockwise a watch on the cover: first, second and third. The second base is on a direct line from the home to the pitcher's mound.
A baseball is hit and the ground to the left of the third base or right of the first base (as seen from the fixing plate) is considered a "farce ball", which invalidates the game. Defective lines are usually painted in the field to show where the edge is.
There are regulatory distances that define the proper baseball field. Each base is 90 feet (27.4 m) away from the next. The pitcher's mound is 60.5 feet (18.4 m) from the fixing plate.

Familiarize yourself with the open field. Crossed the border of the dirt that defines the stadium area is a green wide strip of grass called the open field. The fault lines continue through the gardens, but otherwise the space is open and undefined by structures or lines. There are some defensive players in the open field - left, center and right players - who try to capture and / or return the long distance shots. The gardens are hidden in the center behind the second base. The outer edge of the field is called "near".

Unlike the stadium area, there is no strict rule about the size of a baseball field. The American Professional Baseball Distance Field courses range from 39 to 118.9 m to 435 feet (132.6 m).

Learn the functions of the teams

Each team consists of 25 players, only 9 players in the field at a time, all with specific defensive positions in the field. During offensive play, all players act as hitters, in turn, trying to hit the ball. After the ball was struck, the batter can start running from the base plate around each of the bases in a leftward direction, to complete a return stroke on the home plate and score an item. The defensive team tries to take the ball and score the batter with him, finishing the game. 9 defensive functions are:

The pitcher throws the ball to the batter. The ball should be thrown to a certain level and directly on the fixing plate which is considered fair, but it is a good pitcher yet can make it very difficult to hit.
The receiver squats behind the plate with heavy protective equipment and a special glove and catch the ball when the hitter does not hit him. The receiver can also pick up and throw a ball in play, if it is close.
First base guard first base. They have to be very good at catching the ball; If the first base managed to obtain a hold of the ball before the batter is made on the first base, it is called automatically.
The second base maintains the area between the first and second bases. In addition to marking the runners to second base, the second base also helps to catch balls on the ground before rolling in the open field.
The short field is between the second and third base and returns the balls to one of the base men to help out. The short fields see a lot of action in a typical game - more than any other defensive position - as most right hitters tend to stick the ball into the short field area.
The third base guard closely the third base, and should also have an exceptionally strong throwing arm to send the ball quickly to the first base, along the diamond. This is because (as in the short field) many right-handed hitters send the right ball to the third base when they hit.
Gardeners are three players who maintain a different section of the gardens - left, center and right, as described above. Their job is to catch tall and long balls and prevent the attacking team from scoring runs easy to simply hit the ball hard.
All defensive players are allowed to wear a large leather miter on one side to help them catch the ball. The recipient of the glove is even larger and thicker.

Understanding the role of the referees

The referee is a member of the field not affiliated with one or another team, and the impartiality of the jury. It is the referee's job to look carefully and announce the outcome of each game there are usually a couple of referees in most games. One on the plate, and each of the other three bases. Some games also place two referees in the open field. The home referee usually called the start of the game.

Harassing or intentionally touching an umpire can lead to serious penalties and should be avoided at all costs. Whether he agrees or not, the referee's word is final.

More information about departures. Only offensive team members can get an exit. Once the player is out, they are removed from the game, and the rotation of the bar for the rest of the round. Once the three players are out, the offensive and defensive teams change. There are several ways out. The most common are described below.

If a defensive player catches the ball to the batter before it hits the ground, the batter is automatic, no matter what, even if the ball was caught in the territory of the fault. This is called a "floating".
If a fielder touches a runner with the ball, the runner who is not standing on a base, the runner is out. The ball must be held in the player's hand on the defensive; Beaning the runner with a pitch is unacceptable. This is called a "label".
If a batter gets the chance to hit a good ball, or a lack of rocker and rapper, he is given an attack. Three strikes cause the production, called "punches".
At first base only if a fielder touches the base while holding the ball before the runner can achieve, they are out. This is called a "between teeth".
If a rider is standing on a base and should run forward to make room for the next rider (as a single rider can be a base at one point), they can receive an "out" if a gardener next to the base Touch the base while holding the ball.

Ask about strikes, balls and fouls. On stick day, one of four things can happen at each step: a strike, a ball, a good ball or a foul ball. These terms seem confused as they seem to overlap, but in reality they are very easy to learn:

A strike is an indication that the striker could pass the ball and did not, or danced in the ball and missed. The balls are also cause cracked strikes. After three strikes, the mass is the production and the subsequent mass rises to the plate.
Shooting occurs when the thrower throws a ball that is too far from the strike zone to be considered hit by the batter. After four balls, the batter "on", which is a free advance to the first base. Batsters often essayont whip the plate and take a walk instead of hitting the ball.
A fair ball is a ball that the batter that is between the foul lines, allowing the batter to run to the first base. A good ball that wants hitters, most of the time.
A foul ball is a ball that hits the batter that fell off the foul lines. Unless it transforms into price and side menu, a missing account just like a strike; However, in most cases, players can not have more than two strikes as a result of hitting a foul ball. Felt balls are not counted.

How To Play Baseball For Beginners - Part 2